Pre-motor filter, and soft roller in place. vapors (lighter fluid, gasoline, kerosene, respiratory symptoms. If symptoms appliance before making any adjustments, Only use Shark® branded filters and paint, paint thinners, mothproofing persist, seek medical advice/attention. changing accessories, or storing appliance.
Page 3
AUTO-EMPTY ASSEMBLY (IW3000) NON-AUTO-EMPTY ASSEMBLY (IW1000) 1. Slide the Wand onto the neck of the Floor 4. Place the dock on the floor near a wall 1. Slide the Wand onto the neck of the Floor For proper operation, ensure all components Nozzle until it clicks into place.
Page 4
ODOR NEUTRALIZER TECHNOLOGY ODOR NEUTRALIZER TECHNOLOGY ADJUSTING THE ODOR INTENSITY ODOR CARTRIDGE REPLACEMENT 1. REMOVE ODOR DIAL 2. REMOVE OLD ODOR FROM THE AUTO-EMPTY DOCK CARTRIDGE ODOR DIAL Flip up the handle and rotate the dial clockwise Rotate the cartridge counterclockwise in Flip up the dial handle and rotate the odor dial until the two arrows are aligned.
NOTE: When the unit is docked properly, the charging lights on the battery will blink, indicating that charging has begun. NOTE: The Shark battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of NOTE: The main unit comes with a partial charge.
USING YOUR VACUUM BATTERY REMOVAL REMOVING THE BATTERY CONTROLS AND CLEANING MODES POWER UPRIGHT BATTERY When upright, the nozzle will lock to allow Press the button on the UI Screen to for free standing storage when the hand vac turn on power. To turn off power, press To remove the battery from the hand vacuum, is detached.
ABOVE-FLOOR CLEANING MAINTAINING YOUR VACUUM EMPTYING THE DOCK DUST BIN ABOVE-FLOOR WITH WAND ABOVE-FLOOR WITH HAND VACUUM Detach the hand vacuum to clean above- To detach the floor nozzle from the wand, step on the nozzle while pressing the floor areas. Press the front latch release nozzle release button at the bottom of button on the hand vac where it meets the the wand.
Page 8
USING YOUR VACUUM MAINTAINING YOUR VACUUM USING THE AUTO-EMPTY DOCK CLEANING THE DUST CUP AND FILTER With the dust cup open and the power off, To deep-clean the dust cup, slide the release Place the vacuum on the dock in a downward Once evacuation is complete, the vacuum motion.
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM CLEANING THE SENSORS CLEANING THE AUTO-EMPTY DOCK FILTER Make sure to clean the Detect sensors Fig. 1 regularly, as hair and other debris may build up and obstruct them. If the sensors are partially obstructed, Auto mode will not function as expected.
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM CHECKING FOR BLOCKAGES IN THE VACUUM TROUBLESHOOTING If you run over a hard or sharp object or notice a noise change while vacuuming, check for WARNING: To reduce the risk of shock and unintended operation, turn off blockages or objects caught in the brushroll.
ADDITIONAL ACCESSORIES AVAILABLE ON SHARKACCESSORIES.COM Crevice Tool FIVE (5) YEAR LIMITED WARRANTY Duster Crevice Tool Upholstery Tool The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Wide Upholstery Tool Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
Page 12
1. Product Name: Odor Neutralizer Cartridge not transferable. Model Number: ����������������������������� 2. Manufacturer: Shark Ninja 89 A Street, SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period Date Code: ��������������������������������� Needham, MA 02494 of two (2) years from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following...
Need help?
Do you have a question about the IW1000 Series and is the answer not in the manual?
Questions and answers
How do I clean the area shown in the image as it is not covered in the user manual. All other cleaning actions are covered and carried out.