If the supply cord is damaged, it must be paint, paint thinners, mothproofing d) Inhalation: Move person to fresh air if Only use Shark® branded filters and replaced by the manufacturer, its service substances, or flammable dust) they are experiencing any accessories.
Page 3
AUTO-EMPTY ASSEMBLY (IW3600ANZ) NON-AUTO-EMPTY ASSEMBLY (IW1600ANZ) 1. Slide the Wand onto the neck of the Floor 4. Place the dock on the floor near a wall 1. Slide the Wand onto the neck of the Floor For proper operation, ensure all components Nozzle until it clicks into place.
Page 4
ODOUR NEUTRALISER TECHNOLOGY ODOUR NEUTRALISER TECHNOLOGY ADJUSTING THE ODOUR INTENSITY ODOUR NEUTRALISER TECHNOLOGY FRAGRANCE PUK REPLACEMENT 1. REMOVE ODOUR NEUTRALISER TECHNOLOGY 2. REMOVE OLD DIAL FROM FLOORHEAD FRAGRANCE PUK ODOUR DIAL Flip up the handle and rotate the Odour Rotate the fragrance puk anticlockwise in the Neutraliser Technology Dial clockwise until Odour Neutraliser Technology Dial housing Flip up the handle and rotate the Odour...
NOTE: When the unit is docked properly, the charging lights on the battery will blink, indicating that charging has begun. NOTE: The Shark battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of NOTE: The main unit comes with a partial charge.
USING YOUR VACUUM BATTERY REMOVAL REMOVING THE BATTERY CONTROLS AND CLEANING MODES POWER UPRIGHT BATTERY When upright, the nozzle will lock to allow Press the button on the UI Screen to for free standing storage when the hand vac turn on power. To turn off power, press To remove the battery from the hand vacuum, is detached.
USING YOUR VACUUM USING THE FLEX WAND USING THE AUTO-EMPTY DOCK (IW3600ANZ SERIES) Press the unlock latch on the back of the wand, then adjust the angle. Place the vacuum on the dock in a downward Once evacuation is complete, the vacuum motion.
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM EMPTYING THE DOCK DUST BIN (FOR IW3600ANZ SERIES) CLEANING THE DUST CUP AND FILTER With the dust cup open and the power off, To deep-clean the dust cup, slide the release The dock dust bin holds up to 30 days’ worth To empty the bin, hold it over the trash and press both release buttons and slide the button until the lid opens completely.
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM CLEANING THE SENSORS CLEANING THE AUTO-EMPTY DOCK FILTER (IW3600ANZ SERIES) Make sure to clean the Detect sensors Fig. 1 regularly, as hair and other debris may build up and obstruct them. If the sensors are partially obstructed, Auto mode will not function as expected.
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM CHECKING FOR BLOCKAGES IN THE VACUUM TROUBLESHOOTING If you run over a hard or sharp object or notice a noise change while vacuuming, check for WARNING: To reduce the risk of shock and unintended operation, turn off blockages or objects caught in the brushroll.
Page 11
• Removal of blockages. If a blockage does occur please refer to the trouble shooting guide within your Shark Operating manual • Use of parts and accessories that are not genuine Shark components NOTE: Not all accessories come with all units. Please see the enclosed Quick Start Guide for your unit's configuration.
NZ sharkclean.co.nz Scan QR code using ODOUR NEUTRALISER SPECIFICATIONS mobile device 1. Product Name: Odour Neutraliser Cartridge 2. Manufacturer: Shark Ninja 89 A Street, Needham, MA 02494 RECORD THIS INFORMATION 3. Weight: 17.4g / 0.61oz Model Number: ����������������������������� 4. Ingredients: Solid SM composite polymer Date Code: ���������������������������������...
Need help?
Do you have a question about the Cordless Detect Pro IW1600ANZ Series and is the answer not in the manual?
Questions and answers
Where do I get a new IW 1600 ANZ Series Battery
You can find a new Shark IW1600ANZ Series battery by scanning the code at sharkclean.co.nz for replacement parts.
This answer is automatically generated