Troubleshooting - Uniden BC72XLT Owner's Manual

BC72 Paper OM.fm Page 51 Monday, October 25, 2004 3:11 PM

Troubleshooting

Troubleshooting
If your BC72XLT is not performing properly, try the
following steps.
Problem Possible Cause
The The scanner
scanner might not be
doesn't receiving any
work. power.
Improper The scanner's
reception. antenna might
need to be
adjusted.
Scan The squelch
won't might need to
stop. be adjusted.
Suggestion
Check the batteries
or make sure the
AC adapter is
connected to an AC
outlet and the
scanner.
If there is a wall
switch that controls
power to the AC
outlet where you
connected the AC
adapter, make sure
it is on.
Check the antenna
connection or move
or reposition the
antenna.
Move the scanner.
You might be in a
remote area that
could require an
optional multi-band
antenna. Check
with your dealer or
local electronics
store.
Adjust the squelch
threshold. See
"Turning On The
Scanner and
Setting Squelch" on
Page 33.
Troubleshooting
51