Uniden BC72XLT Owner's Manual page 39

BC72 Paper OM.fm Page 39 Monday, October 25, 2004 3:11 PM
If you selected C-C.Alt, skip to Step 5. If you
selected C-C.PS, skip to Step 7.
3. Repeatedly press
want to search appears, then press E to select it.
Otherwise, press
The scanner displays the following options.
Lo On or Lo OFF: Lets you select the
VHF Lo frequency band.
Air On or Air OFF: Lets you select the
Air frequency band.
Hi On or Hi OFF: Lets you select the
VHF Hi frequency band.
UHF On or UHF OFF: Lets you select the
UHF frequency band.
4. Repeatedly press
want appears, then press E to select it.
Otherwise, press
Then skip to Step 9.
5. Press E while C-C.Alt appears. One of the
following alert options appears.
ALt bEEP: The scanner beeps when a Close
Call signal is detected.
ALt Light: The scanner flashes the display
backlight when a Close Call signal is detected.
ALt bP-Lt: The scanner flashes the display
backlight and beeps when a Close Call signal is
detected.
ALt OFF: The scanner does not provide any
alert when a Close Call signal is detected.
or until the band you
if you do not want to select it.
or until the option you
if you do not want to select it.
Special Features
39