Uniden BC72XLT Owner's Manual page 40

BC72 Paper OM.fm Page 40 Monday, October 25, 2004 3:11 PM
6. Repeatedly press
appears, then press E to select it. Otherwise, press
if you do not want to select it. Then skip to Step 9.
7. Press E while C-C.PS appears. One of the
following Pager Screen options appears.
PS On: The scanner ignores hits on common
pager frequencies.
PS OFF: The scanner alerts you when it receives
hits on common pager frequencies.
8. Repeatedly press
want appears, then press E to select it.
9. When you select the option, press Scan to start
Close Call search. Otherwise, to continue normal
scanning, repeatedly press Func until
then press Scan.
Using Close Call RF Capture
To turn on the Close Call feature, press Func +
once except in WX search, band select, or program
mode. appears. Every 2 seconds, the scanner
checks for frequencies in the range you specified in
"Setting the Close Call Options" on Page 38.
Notes:
• Set the squelch tight (where only strong signals
are received) while using Close Call.
• To continue scanning normally while the Close
Call feature is working, simply press Scan twice.
When the scanner finds a frequency, it sounds the
alert you specified in "Setting the Close Call
Options" on Page 38, and Found flashes. Press any
key to confirm the displayed frequency. Press Scan
to resume scanning. Or press
frequency and appear to select the band where
F
you are searching.
or until the option you want
or until the option you
disappears
F
or while the
Special Features
40