Table of Contents
Advertisement
BC244clt.qxd
2/10/99
TROUBLESHOOTING
If your BC244CLT is not performing properly, try the following steps.
Problem
Scanner wont work.
Improper reception.
Scan won't start.
3:34 PM
Page 20
Check the connections at both ends of the
AC Adapter.
Turn on the wall switch of your room.
You could be using an outlet controlled
by the wall switch.
Move the AC Adapter to another wall
outlet.
Check antenna connection
Move or angle the antenna.
If programmed frequency is higher than
406MHz, a shorter antenna length may
improve the reception.
Relocate the scanner.
You may be in a fringe area. This could
require an optional multi-band antenna.
Check with your dealer or local electronics
store.
Press the Scan key again.
Adjust the Squelch control.
Check to see if 29 channels are locked out. If
so, unlock the channels as needed.
20
Solution
Hide quick links:
Advertisement
Table of Contents
