Uniden LRD6299SWS Operating Manual page 7

X K Ka L
1 2 3 4 5 6
1. X-Band Signal Indicator — A green LED lights and blinks to
indicate the presence of an X-band radar signal. The blink rate
increases as the radar source gets closer. A distinct audio alert is
also heard.
2. K-Band Indicator — An amber (orange) LED lights and blinks to
indicate the presence of a K-band radar. The blink rate increases as
the radar source gets closer. A distinct audio alert is also heard.
3. Ka-SuperWideband Signal Indicator — A yellow LED lights and
blinks to indicate the presence of a Ka-SuperWideband radar
signal. The blink rate increases as the radar source gets closer. A
distinct audio alert is also heard.
4. Laser Signal Indicator — A red LED under L lights and blinks to
indicate the presence of a laser signal. A distinct audio alert is also
heard.
5. SWS Signal Indicator — When an early warning hazard or
informational signal is detected, the yellow SWS LED begins to
blink and the amber K-band LED lights. A distinct audio alert is
also heard.
6. Power-On Indicator — A green LED under P lights to indicate
power is being supplied to the unit and the unit is turned on.
7. LED Signal Strength Meter — Four LEDs give an accurate visual
indication of the strength of radar or laser signals.
8. City Mode Indicator — A green LED under C lights to indicate
that you selected City Mode.
9. Auto Mute Indicator — A red LED under M lights to indicate that
you selected the Auto Mute feature.
Note: Every time you turn on the LRD 6299SWS/LRD 6399SWS, a
self-test is performed for all LEDs and Alert tones. You will hear
in-order four distinct tones for the X-, K-, and
Ka-SuperWideband radar bands, as well as for laser.
SWS P 1 2
7
7
3 4 C M
8 9