Recording From Cds - Sony CDP-XA7ES Operating Instructions Manual

Recording From CDs
Number buttons PLAY MODE
CDP-XA7ES
» Il >12
Number buttons PLAY MODE
CDP-XASES/XA3ES
> II >12
Follow Steps 1 and 2 in "Creating Your Own
Program" on page 13.
A pause is counted as one track
You can program up to 23 tracks when you insert a
pause.
Key You can check the total playing time while
programming (Program Edit)
This feature helps you find the last track that will fit on
one side of the tape.
1 Press PLAY MODE repeatedly until "PROGRAM"
appears in the display. (When using the remote, press
PROGRAM.)
The total playing time including the selected track
appears in the display and the step number of the
program flashes.
3 Press PLAY MODE (or PROGRAM on the remote) to
. confirm your selection.
4 Repeat Steps 2 and 3 to program other tracks.
Ç To check and change your program
See page 14.
"SIDE-A" appears while checking the program for side A
and "SIDE-B" while checking the program for side B.
A one-second access time blank is added between the
tracks.
'CX You can automatically insert a blank space of 3
seconds between each track
Use the Auto Space function (see page 18).
You cannot use this function when your player is
CDP-XA7ES.
You can have the player create a program that will fit
the length of the tape. Select one of the following
options:
The program can contain up to 24 tracks (a pause
inserted between tracks is counted as one track).
Note that tracks whose numbers are over 24 cannot be
programmed.