Recording From Cds; Recording Your Own Programme; Recording A Cd By Specifying Tape Length (Time Edit/Just Edit) - Sony CDP-761 Operating Instructions Manual

Recording From CDs
RSA aera rere ee
Recording Your Own Programme
You can record the programme you've created ona
tape, DAT or MD. The programme can contain up to 24
tracks.
By inserting a pause during programming, you can
divide the programme into two for recording on both
sides of a tape.
Number buttons >20
> HH PROGRAM
1 Create your programme (for side A when
recording on a tape) while checking the total
playing time indicated in the display.
Follow Steps 1 and 2 in "Creating Your Own
Programme" on page 9.
The (4.] indication appears in the display.
2 When you record on both sides of the tape, press
Hl to insert a pause.
The "P" and (4-6) indications appear in the display
and the playing time is reset to "0.00."
When you record on one side of the tape or ona
DAT or MD, skip this step and go to Step 4.
A pause is counted as one track
You can programme up to 23 tracks when you insert a
Pause.
3 Repeat Step 1 to create the programme for side B.
4 Start recording on the deck and then press [> on
the player.
When you record on both sides of the tape, the
player pauses at the end of the programme for side
A.
5 When you record on side B, reverse the tape and
press [> or Ion the player to resume playing.
¢ You can check the total playing time while
programming (Programme Edit)
To select a track, press II or D1 and check the total
playing time. Then press PROGRAM to confirm your
selection.
Ker To check and change your programme
See page 10.
The [6-9} indication appears while checking the
programme for side A and [00] while checking the
programme for side B.
Key When tracks, which aren't numerically consecutive on
the disc, are programmed consecutively (i.e. 1, 3, 5
etc.)
A one-second access time blank is added between the
tracks.
Ker You can automatically insert a blank space of 3
seconds between each track
Use the Auto Space function (see page 14).
SS A ee
Recording a CD by Specifying
Tape Length (Time Edit/Just Edit)
You can have the player create a programme that will | EN|
fit the length of the tape. Select one of the following 11
options:
¢ Time Edit: automatically creates a programme,
keeping the original order of the disc.
¢ Just Edit: automatically arranges the track order to fit
the tape length.
The programme can contain up to 24 tracks (a pause
inserted between tracks is counted as one track).
Note that tracks whose numbers are over 24 cannot be
programmed.
CDP-761/761E
9n00000
a00e000 —
EDIT/TIME FADE
CDP-561/561E/461
ce KX/PPDI
EDIT/TIME FADE
fc KKX/PPI