Nikon ECLIPSE E800 Instructions Manual page 21

■ ECLIPSE E800 (Main body of the microscope)
Power source:
For 100/120 V area: Power supply V-PS100DU
For 230 area: Power supply V-PS100E
Input voltage:
12 V DC
Light source:
Lamp rating
Lamp type:
Protection class:
Class
I
Temperature: 0 to +40° C
Humidity: 85% Rh max., noncondensing
Altitude: 2000 m max.
Pollution: Degree 2
Installation: Category II
Temperature: -20 to +60° C
Humidity: 90% Rh max., noncondensing
• UL listed product
• FCC I5B class A satisfied
This equipment has been tested and found to comply with the limits for a
Class A digital device pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protections against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which the
user will be required to correct the interference at this own expense.
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numerique de la Classe A respecte toutes les exigences du
Reglement sur le materiel brouilleur du Canada
Conforming standards
• GS approved product
(for 230 V area):
• EU Low Voltage Directive satisfied
• EU EMC Directive satisfied
■ V-PS100DU (Power supply for 100/120 V area)
■ V-PS100E (Power supply for 230 V area)
Refer to the instruction manual provided with the "Power Supply V-PS100DU, V-PS100E".
f
" _ ' \
Nikon reserves the right to make such alterations in design as may be considered necessary in the light
of experience. For this reason, particulars and illustrations in this handbook may not conform in every
detail to models in current production.
Operating environmental
conditions:
Storing environmental
conditions:
Conforming standards
(for 100/120V area):
12 VDC, 100 W
Halogen lamp
(OSRAM HLX 64623 or PHILIPS 7724)
39