KTM 250 EXC-F 2014 Setup Instructions page 8

2 SETUP
–
Position the turn signal on each side and mount and tighten nuts.
–
Connect plug-in connection of the right turn signal using the black and
brown cable colors.
–
Connect plug-in connection of the left turn signal using the violet and
brown cable colors.
B01753-01
(All EXC‑F models)
–
Mount the turn signal switch.
–
Install the front fender. (
–
Refit the headlight mask with the headlight. (
–
Install the front wheel. (
–
Correctly mount the fuel tank breather.
401382-01
–
Secure the handlebar cushion with two cable binders.
601710-01
–
Mount the footrests with the springs and pins. Secure the pins using the washers
and cotter pins.
Pliers for footrest spring (58429083000)
101019-01
(All EXC‑F models)
–
Mount the license plate holder with the license plate lamp, turn signals, and
reflector.
–
Connect the electrical components.
–
Connect the connector of the left turn signal with connector that is marked red.
–
Connect the connector of the right turn signal with the connector that is marked
green.
601711-01
p. 11)
p. 9)
p. 10)
6