Table of Contents
Advertisement
3
WORK
3.1
Raising the motorcycle with the lift stand
3.2
Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
3.3
Removing headlight mask with headlight
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (54829055000)
The wheels should no longer touch the ground.
–
Secure the motorcycle against falling over.
B01513-01
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press the side stand
lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up and secured with the
rubber band.
B01506-10
–
Switch off all electrical equipment.
–
Remove screw
–
Loosen the rubber band
B01560-10
–
Pull out the electric plug connector
headlight.
B01561-10
and take off clamp.
1
. Push up the headlight mask and swing it forwards.
2
and remove the headlight mask with the
3
to the ground with your foot and
1
8
Advertisement
Table of Contents
