Onboard Device Configuration - Asus M3N-H/HDMI Manual

IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices.
Configuration options: [PCI Device] [Reserved]
Maximum Payload Size [4096]
Sets maximum TLP payload size for the PCI Express devices. The unit is byte.
Configuration options: [128] [256] [512] [1024] [2048] [4096]
4.4.6

Onboard Device Configuration

Advanced
Onboard Device Configuration
IDE Function Setup
MCP Storage Config
Onboard 1394
HD Audio
Front Panel Support Type
HDMI Audio
Onboard LAN Device
Onboard LAN Boot ROM
Serial Port1 Address
IDE Function Setup
Advanced
OnChip IDE Channel0
IDE DMA transfer access
SATA Controller
IDE Prefetch Mode
OnChip IDE Channel 0 [Enabled]
Allows you to enable or disable the onchip IDE channel 0 controller .
Configuration options: [Disabled] [Enabled]
IDE DMA transfer access [Enabled]
Allows you to enable or disable the IDE DMA transfer access.
Configuration options: [Disabled] [Enabled]
SATA Controller [Enabled]
Allows you to enable or disable the onboard SATA controller.
Configuration options: [Disabled] [Enabled]
IDE Prefetch Mode [Disabled]
Allows you to enable or disable the IDE PIO read prefetch mode.
Configuration options: [Disabled] [Enabled]
4-24
Phoenix-Award BIOS CMOS Setup Utility
[Enabled]
[Auto]
[HD Audio]
[Auto]
[Enabled]
[Disabled]
[3F8/IRQ4]
Phoenix-Award BIOS CMOS Setup Utility
IDE Function Setup
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Select Menu
Item Specific Help
Select Menu
Item Specific Help
Chapter 4: BIOS setup