Pcipnp - Asus M3N-H/HDMI Manual

Primary Display Adapter [PCI-E]
Allows you to select which graphics controller to use as the primary boot device.
Configuration options: [PCI] [Onboard] [PCI-E]
4.4.5

PCIPnP

Advanced
Plug & Play O/S
Resources Controlled By
x IRQ Resources
**PCI Express relative items **
Maximum Payload Size
Plug & Play O/S [No]
When set to [No], the BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
Resources Controlled By [Auto]
When set to [Auto], the BIOS automatically configures all the boot and Plug and
Play compatible devices. Set to [Manual] if you want to assign the IRQ DMA and
memory base address fields.
Configuration options: [Auto] [Manual]
When the item Resources Controlled By is set to [Auto], the item IRQ
Resources is grayed out and not user-configurable. Refer to the section IRQ
Resources for information on how to enable this item.
IRQ Resources
This sub-menu is activated only when the Resources Controlled By item is set to
[Manual].
Advanced
IRQ Resources
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-14 assigned to
ASUS M3N-H/HDMI
Phoenix-Award BIOS CMOS Setup Utility
PCIPnP
[No]
[Auto]
[4096]
Phoenix-Award BIOS CMOS Setup Utility
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
Select Menu
Item Specific Help
Select Yes if you are
using a Plug and Play
capable operating
system Select No if
you need the BIOS to
configure non-boot
devices
Select Menu
Item Specific Help
Legacy ISA for devices
compliant with the
original PC AT bus
specification, PCI/
ISA PnP for devices
compliant with the
Plug and Play standard
4-23