Advertisement
If you personalize more devices, you can use the Set
Defaults option at the top of the Device Configuration
screen. Pressing this button will substitute all recently
entered data (passwords, Wi-Fi settings, remote access,
calendar, location and time zone) into the new device.
Configuration and calibration of blinds
The controller is configured from the device settings in the Fox
application. In order to do this, open the roller shutter view,
expand the
Settings menu. In the settings menu, select and expand the
Advanced settings and in the available options select (if neces-
sary) the ability to control the slat tilt and perform calibration of
the roller shutter travel time.
Time of opening and closing of the roller shutters can be
set automatically (Autocalibration button) or by manual
entering of the travel time value (for this purpose un-
check the box Auto position detection). The slats
opening time is set manually using the Slat movement
time slider.
menu in the upper right corner and select the
- 10 -
Advertisement
