Table of Contents
Advertisement
DR-E22BK
DR-E22LBK
Removal
Procedures
Since this machine is assembled in a particular order, when removing parts, follow this flow chart.
10. Rear panel
11. Bottom cover |
12. Power pack
5. Main VR board
1. Removing the Top Cover
(1) Remove the 3 screws on either side of the deck.
(2) Remove the 2 screws on the back, then lift up the back
of the top cover.
2. Removing the Front Panel
(1) Remove the screw a) on the right side.
(2) Remove the plastic rivet @) holding the Tuner Board.
(3) Remove the 3 black screws at the bottom of the panel.
(4) Remove the 2 white screws fixing the mechanism to
the bottom of the panel.
(5) Remove the wires.
3. Removing the Headphone
Board
(1) Remove the Balance knob.
(2) Remove the 3 screws holding the Headphone Board.
4. Removing the SEA Board
(1) Remove the screw holding the SEA Board, then remove
the SEA Board from the front panel's hooks.
3. Head phone board
4. SEA board
Tuner LCD Board
13. Tuner board
14. Tuner LCD board
6. Cassette mechanism section
7. Motor board
8. Cassette door
9. Cassette LED board
Tuner-Board (5)
(7) (2)
Main VR Board
@
Advertisement
Table of Contents
