NetWork
1. Press MENU on the remote control to display the OSD Menu.
2. Then press OK or use
menu.
3. Press
/
to select the menu option. Then press OK to display its sub-menu, or
q
p
press
/
to adjust/select the setting.
t
u
NOTE: Some sub-menu options may have another sub-menu layer.
Menu Option
Ethernet Setting
on the remote control to select the NetWork
/
/
/
q
p
t
u
Ethernet Switch
Toggle the wired network connection On or Off.
Connection Mode
Select the network connection method, DHCP IP or Static IP.
NOTE:
If Manual IP is selected, you need to configure the IP,
Netmask, Gateway, and DNS.
Network Status
View the network connection status.
Description
40 40