Bissell PET HAIR ERASER TURBO Quick Start Manual page 9

Remove/Empty Dirt Tank
WARNING
To reduce the risk of electrical shock, turn power switch OFF and disconnect polarized plug from
electrical outlet before performing maintenance or troubleshooting checks.
1
The Dirt Tank is full. Time to empty!
3
Hold the Dirt Tank over a trash bin
and press the Empty Button. Once
emptied, snap bottom back into place.
WARNING
Do not operate vacuum with damp or wet fi lters. Allow components to dry before reassembling the
Dirt Tank.
WARNING
Before using your vacuum, make sure that the Dirt Tank is in locked position and that all fi lters, both
pre- and post-fi lters, are in place. DO NOT operate your vacuum without these fi lters.
2
Press the Tank Release Button and grab
the handle to pull the Dirt Tank away from
vacuum.
4
Return the
Dirt Tank to
the vacuum,
securing the
bottom in
place first and
then pushing
back until you
hear a "click."
www.BISSELL.ca
9