Bissell PET HAIR ERASER TURBO Quick Start Manual page 11

Clean/Replace Post-Motor Filter
WARNING
To reduce the risk of electrical shock, turn power switch OFF and disconnect polarized plug from
electrical outlet before performing maintenance or troubleshooting checks.
WARNING
Do not operate vacuum with damp or wet fi lters. Allow components to dry before reassembling the
Dirt Tank.
1
Press the Dirt Tank Release Button and
pull Dirt Tank away from vacuum.
3
Twist filter counter-clockwise to
unlock and remove from vacuum.
NOTE: Replace fi lters every 3 to 6 months. Visit BISSELL.ca for fi lter replacements.
2
Pull tab up to access Post-Motor Filter.
4
When reassembling, be sure to lock the
filter back into place. The pleated filter
may NOT be washed. If dust/debris
accumulates, gently tap the filter on the
inside of a trash container.
www.BISSELL.ca
11