Bissell PET HAIR ERASER TURBO Quick Start Manual page 12

Clean Inner Cyclone Separator
2
1
Hold the Dirt Tank over
Twist Cyclone counter-
a trash container. Press
clockwise and pull down
the bottom release
to remove from tank.
button to empty.
Maintain Pet TurboEraser® Tool
1
Twist gray collar
counter-clockwise, until
slot appears, and then
separate faceplate.
3
To reassemble, align two clips on each end
of Paddle Wheel with Belt on and pop back
into place. Place Brush Roll with Belt back
in. Faceplate will not close properly if all
parts are not aligned correctly.
12
www.BISSELL.ca
3
Tap separator against inside
of trash container and
rinse under warm water, if
necessary. Be sure to let
it dry completely before
placing back in Dirt Tank.
Paddle Wheel
2
Belt
Roller
Remove Brush Roll, Belt, and Paddle
Wheel. Inspect for damages and
replace if necessary.
4
To put faceplate back on, align the tabs
in the top of the cover and place it down
to "click" into place.