Degamma Table Select - Digital Projection LIGHTNING 30sx+c User Manual

LIGHTNING 30sx+c, 40sx+c
Digital Projection

Degamma Table Select

Used to set and query degamma table settings.
CALL : "image,degammaselect,write,[table no.][parametric]"
: Where [table no.] is one of:
: 0 - Graphics/NTSC
: 1 - Graphics Enhanced
: 2 - NTSC Enhanced
: 3 - PAL/SECAM 2.8
: 4 - PAL/SECAM Enhanced
: 5 - Linear
:
: 255 - use parametric value:
:
: and [parametric] is in the range 0.01 to 4.0 in steps of 0.0001
RETURNS : "[msg id],ACK,degammaselect,[table no.][parametric]"
: OR
: "[msg id],NAK,degammaselect"
CALL : "image,degammaselect,read,[urgency switch]"
NOTE : Urgency switch is currently ignored (can be set to 0).
RETURNS : "[msg id],degammaselect,[table no.][parametric]"
: OR
: "[msg id],NAK,degammaselect"
105-941A January 2007
User Manual 6. Appendix
Notes
Page 6.21