LIGHTNING 30sx+c, 40sx+c
Digital Projection
Show mode
When the projector is fi rst switched on, the control panel will be in Show mode, as
shown below:
In Show mode, these icons are displayed:
Lamp status
Lamp off
Lamp off
Shutter closed
Shutter open
Input source
Single/Dual/Twin mode
105-941A January 2007
User Manual
Lamp on
Lamp on
Shutter closed
Shutter open
4. Using the Menus
Main menu
Show mode indicators
Lamp status
Warnings
Input source
LCD screen blank
IP addresses
Menu buttons....
Lamp menu
Lens menu
Image menu
Confi g menu
Engineering & Maintenance menu
Show mode
Notes
The buttons of the Main menu
are always visible at the bottom
of the display, as shown here.
To go back to a previous menu
option that is no longer visible,
call up the menu again using
the appropriate Main menu
button.
Page 4.5