Using The Extended Information Screens - US Robotics Sportster Operating Instructions Manual

You can change stored numbers by highlighting
them and then typing the new numbers in their
place. Once you store your numbers, you can
dial them by entering this command from
Terminal Mode:
ATDS0, ATDS1, ATDS2, etc.
Your U.S. Robotics modem comes with one
phone number already stored in Position 0. If
you haven't changed the default, typing
ATDS0 will automatically dial the U.S.
Robotics BBS. You will want to change this if
you are using a dumb terminal or online listing
service, of course.
Once you enter the numbers you wish to store,
click Save to Modem to store them. Click
Exit to return to the Main menu.
The last option, Restore Defaults, resets your
modem to factory specifications. This option is
80
U M S
SING ODEM TATION
available from many of the screens within
Modem Station. When you click Restore
Defaults, you will see a confirmation screen
asking if you are
sure you want to restore defaults. Click OK to
proceed.
TIP:
your modem back to factory
specifications. It is a good place to
start when troubleshooting.
Using the Extended
Information Screens
The "Extended Information" screens provide
important and useful information about your
modem. Unfortunately, some of this
information is very complex.
Restore Defaults will set