Using Terminal - US Robotics Sportster Operating Instructions Manual

If your modem is installed and configured
correctly, Modem Station will find the
modem and display make and model
information under the assigned port. All
currently active ports should display "Port
OK" under the heading. If a port displays a
"Port Error", it usually means that the port is
disabled in system setup.
NOTE:
Different systems and
BIOSes use different methods of
disabling COM ports. As a result,
we cannot provide support for
enabling COM ports. Please refer
to your system's documentation or
contact the manufacturer of your
system for further information.
70
U M S
SING ODEM TATION
If you look at the information for the port your
modem is using, you will see three buttons.
These allow you to access Terminal and
Modem Configurator without going back to
the main menu. Extended Information provides
detailed information about your modem,
previous connections, firmware dates, etc. This
next section details using the Terminal option.

Using Terminal

You can access Terminal from either the Main
menu or the Detect New Modems screen.
Clicking Terminal brings up the Terminal
window.