Regulatory Information - US Robotics SureConnect 9000 Quick Installation Manual

Regulatory Information

Manufacturer's Declarations of Conformity
FCC Declaration of Conformity
We declare under our sole responsibility that the U.S. Robotics SureConnect ADSL
USB Modem to which this declaration relates, is in conformity with the following
standards or other normative documents:
ANSI C63.4-1992 Methods of measurement
Federal Communications Commission 47 CFR Part 15, subpart B
1) 15.107 (e) Class B Conducted Limits
2) 15.109 (g) Class B Radiated Emissions Limits
FCC Class B Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
this device may not cause harmful electromagnetic interference, and
this device must accept any interference received including interference
that may cause undesired operations.
Radio and Television Interference
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates and uses radio frequency energy and, if not installed and
used in accordance with the instructions, may cause interference to radio communi-
cations. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna or cable input device.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The user may find the following information prepared by the Federal
Communications Commission helpful:
Telephone Interference Bulletin.
This document is available on the Internet through the FCC Consumer Information
Bureau Home Page at http://www.fcc.gov/cib. Under Consumer Information
Directory>Telephone>Miscellaneous Telephone Information, select Interference
to Telephones.
Caution: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
In order to maintain compliance with the limits of a Class B digital device, US
Robotics requires that you use a quality interface cable when connecting to this
device. Suggested cable type is 90-ohm USB cable for the USB port, and standard
telephone cable for the RJ-11 port, 26AWG.
22
All manuals and user guides at all-guides.com
UL Listing/C-UL Listing
This information technology equipment is UL Listed and C-UL Listed for both the US
and Canadian markets respectively.
FCC Part 68 Registration
This equipment complies with Part 68 of the FCC rules. This unit bears a label, which
contains the FCC registration number and ringer equivalence number (REN). If
requested, this information must be provided to the telephone company.
This equipment uses the following standard jack types for network connection: RJ11-6.
This equipment contains an FCC compliant modular jack. It is designed to be
connected to the telephone network or premises wiring using compatible modular
plugs and cabling which comply with the requirements of FCC Part 68 rules.
In the unlikely event that this equipment causes harm to the telephone network,
the telephone company can temporarily disconnect your service. The telephone
company will try to warn you in advance of any such disconnection, but if advance
notice isn't practical, it may disconnect the service first and notify you as soon as
possible afterwards. In the event such as disconnection is deemed necessary, you
will be advised of your right to file a complaint with the FCC.
From time to time, the telephone company may make changes in its facilities,
equipment, or operations, which could affect the operation of this equipment. If this
occurs, the telephone company is required to provide you with advance notices so
you can make the modifications necessary to maintain uninterrupted service.
If you experience difficulties, check your connection and software configurations.
There are no user repairs that can be done on the unit.
For Canadian Modem Users
Utilisateurs de modems au Canada
Industry Canada (IC)
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the interference-causing equipment standard
entitled Digital Apparatus, ICES-003 of Industry Canada.
Le présent appareil numérique n'émet pas de bruits radio-électriques dépassant les
limites applicables aux appareils numériques de la classe B prescrites dens le
Règlement sur le brouillage radioélectrique édicté par l'Industrie. NMB-003
AVIS : Le nombre équivalent de sonneries (REN) affecté à chaque terminal indique le
nombre maximal de terminaux qui peuvent être branchés à une interface télé-
phonique. L'équipement terminal d'une interface peut comporter toute combinaison
d'appareils, à la condition unique que le nombre équivalent total des sonneries de
tous les appareils ne dépasse pas 5. Le nombre équivalent des sonneries se trouve
sur la base du modem.
AVIS : L'étiquette d'Industrie Canada (IC) permet d'identifier le matériel homologué.
Cette homologation signifie que le matériel est conforme à certaines normes de
protection, d'exploitation et de sécurité des réseaux de télécommunications, comme
le prescrivent les documents qui portent sur les exigences techniques relatives à
l'équipement terminal. Cependant, le Ministère ne garantit pas que l'appareil
fonctionnera à la satisfaction de l'utilisateur.
Avant d'installer ce matériel, l'utilisateur doit s'assurer qu'il est permis de le raccorder
aux installations de l'entreprise locale de télécommunication. Le matériel doit
également être installé selon une méthode de raccordement autorisée. Dans
certains cas, le câblage intérieur de la compagnie étant associé à une ligne individuelle,
le service individuel peut être étendu au moyen d'un connecteur certifié (rallonge
téléphonique). L'abonné ne doit pas oublier que la conformité aux conditions
23