Table of Contents
Advertisement
No.
Item
• Check operation and for oil leak-
• Adjust if necessary.
• Clean dust seal and lubricate with
23 * Front fork
• Replace fork oil.
• Replace oil seals.
• Replace protector seal.
• Check operation and adjust.
• Tighten if necessary.
• Lubricate with lithium-soap-based
Shock absorber
24 *
assembly
25 * Drive chain roller and
• Check for wear or damage.
• Replace if necessary.
support guide
• Check operation and tighten if
26 * Rear suspension
• Lubricate with molybdenum disul-
• Check bearing assemblies for
Swingarm pivot bear-
27 *
ings
• Lubricate with molybdenum disul-
• Lubricate with lithium-soap-based
28
Sidestand
• Check operation, free play, and
29 * Steering head
• Clean and lubricate with lithium-
• Replace bearings.
• Check tire air pressure, wheel
• Tighten sprocket bolts if neces-
30 * Tires and wheels
• Check wheel bearings for loose-
• Lubricate wheel bearings with lith-
• Replace wheel bearings.
• Lubricate.
Moving parts and
31 *
cables
• Check operation.
• Check throttle grip free play, and
32 * Throttle grip
• Lubricate cable and grip housing.
Routine
age.
lithium-soap-based grease.
grease.
necessary.
fide grease.
looseness.
fide grease.
grease.
tighten if necessary.
soap-based grease.
runout, spokes for looseness, and
tires for wear.
sary.
ness.
ium-soap-based grease.
adjust if necessary.
MAINTENANCE INTERVALS
Every
After
race
third race
break-in
(about 2.5
(about 7.5
hours)
3-3
Every
Every
fifth race
As
(about 12.5
required
hours)
hours)
(After
washing
the motor-
cycle or
riding in
the rain)
Advertisement
Chapters
Table of Contents
Troubleshooting
