Yamaha YZ125 2019 Owner's Service Manual page 64

2. Adjust:
• Clutch lever free play
Handlebar side
a. Turn the adjuster "1" until the specified
clutch lever free play is obtained.
If the clutch lever free play cannot be obtained
on the handlebar side, use the adjuster on the
clutch cable side.
Clutch cable side
a. Slide the clutch cable cover.
b. Loosen the locknut "1".
c. Turn the adjuster "2" until the specified
clutch lever free play is obtained.
d. Tighten the locknut.
Locknut:
4 Nm (0.4 m•kg, 2.9 ft•lb)
e. Return the clutch cable cover to its original
position.
ADJUSTING THE THROTTLE GRIP FREE
PLAY
1. Check:
• Throttle grip free play "a"
Out of specification → Adjust.
Throttle grip free play "a":
3.0–5.0 mm (0.12–0.20 in)
2. Adjust:
• Throttle grip free play
Adjustment steps:
a. Slide the adjuster cover.
b. Loosen the locknut "1".
c. Turn the adjuster "2" until the specified free
play is obtained.
d. Tighten the locknut.
Locknut:
7 Nm (0.7 m•kg, 5.1 ft•lb)
Prior to adjusting throttle grip free play, the en-
gine idling speed should be adjusted.
After adjusting the throttle grip free play,
turn the handlebar to the right and to the left
to ensure that this does not cause the en-
gine idling speed to change.
3-9
ENGINE