1. Brake hose
2. Master cylinder
3. Engine stop switch lead
4. Engine stop switch
5. Throttle cable
6. Clutch cable
7. Clamp
8. Cable guide
A. Install the brake hose so that its pipe por-
tion directs as shown and lightly touches
the projection on the master cylinder.
B. Pass the engine stop switch lead in the
middle of the clutch holder.
C. Clamp the engine stop switch lead to the
handlebar.
D. Pass the brake hose in front of the number
plate and through the cable guide.
E. Pass the clutch cable through the cable
guide on the number plate.
CABLE ROUTING DIAGRAM
2-24