Yamaha YZ125 2019 Owner's Service Manual page 189

HANDLEBAR
REMOVING THE HANDLEBAR
4 Nm (0.4 m kg, 2.9 ft lb)
40 Nm (4.0 m kg, 29 ft lb)
Order
Number plate
1 Clutch cable
2 Clutch lever holder
3 Engine stop switch
4 Brake master cylinder
5 Throttle cable cap
6 Throttle cable
7 Throttle
8 Cap cover
9 Collar
10 Left grip
11 Upper handlebar holder
12 Handlebar
13 Lower handlebar holder
0.5 Nm (0.05 m kg, 0.36 ft lb)
Part name
5-36
9 Nm (0.9 m kg, 6.5 ft lb)
28 Nm (2.8 m kg, 20 ft lb)
5 Nm (0.5 m kg, 3.6 ft lb)
0.5 Nm (0.05 m kg, 0.36 ft lb)
4 Nm (0.4 m kg, 2.9 ft lb)
Q'ty Remarks
Remove the band only.
1 Disconnect at the lever side.
1
1
1 Refer to removal section.
1 Turn over the cap cover.
1 Disconnect at the throttle side.
1 Loosen the bolts.
1
1
1 Refer to removal section.
2
1
2
HANDLEBAR