Yamaha YZ125 2019 Owner's Service Manual page 103

INSTALLING THE CARBURETOR
1. Install:
• Carburetor "1"
Install the projection between the carburetor
joint slots.
2. Tighten:
• Bolt (air filter joint) "1"
Bolt (air filter joint):
2 Nm (0.2 m•kg, 1.4 ft•lb)
• Bolt (carburetor joint) "2"
Bolt (carburetor joint):
2 Nm (0.2 m•kg, 1.4 ft•lb)
3. Clamp:
• Air vent hose "1"
• Overflow hose "2"
Refer to "CABLE ROUTING DIAGRAM"
section in the CHAPTER 2.
CARBURETOR AND REED VALVE
4. Adjust:
• Idle speed
Refer to "ADJUSTING THE ENGINE
IDLING SPEED" section in the CHAPTER 3.
4-16