Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for AOC L32W961
Summary of Contents for AOC L32W961
-
Page 2: Table Of Contents
DIGITAL TELEVISION TRANSITION NOTICE ... 1 FOR YOUR SAFETY... 2 PRECAUTIONS AND REMINDERS ... 3 IMPORTANT SAFETY INSTRUCTIONS ... 4 PACKAGE CONTENTS... 5 PREPARATION... 6 ATTACHING THE BASE...6 PREPARING YOUR LCD HDTV FOR WALL MOUNTING ...6 PERIPHERAL CONNECTION GUIDE ... 8 OPERATING INSTRUCTIONS... -
Page 3: Digital Television Transition Notice
DIGITAL TELEVISION TRANSITION NOTICE This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June 12, 2009. Some older television receivers, if they rely on a TV antenna, will need a TV Converter to receive over the air digital programming, but should continue to work as before for other purposes (e.g., for watching low-power TV stations still broadcasting in analog, watching pre-recorded movies, or playing video games). -
Page 4: For Your Safety
FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 5: Precautions And Reminders
PRECAUTIONS AND REMINDERS Place unit on even surfaces. Unplug immediately if is malfunction like no picture, no video/audio,smoke and bad odor from TV. Don't throw any object inside the TV box like metals or other flammable materials. Don't place the TV in confined spaces or in a box when using it. -
Page 6: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. -
Page 7: Package Contents
TV to the adapter! 26. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,such as vases, shall be placed on the apparatus. PACKAGE CONTENTS L32W961 TV unit Remote Control Two (AAA) Batteries for the Remote Control... -
Page 8: Preparation
PREPARATION IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. ATTACHING THE BASE IMPORTANT: The Base of the HDTV must be assembled prior to usage. 1. -
Page 9: Remote Control
Please make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! 1. Install the base stand; place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air. -
Page 10: Peripheral Connection Guide
PERIPHERAL CONNECTION GUIDE 1. HDMI – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. 2. -
Page 11: Operating Instructions
OPERATING INSTRUCTIONS TO USE THE FRONT PANEL CONTROL VOL + VOL +: Press to increase the sound volume level. VOL - VOL - : Press to decrease the sound volume level. CH +: Press to select the next higher Program number. CH - : Press to select the next lower Program number. -
Page 12: To Use The Remote Control
TO USE THE REMOTE CONTROL POWER Press to turn ON/OFF (standby) the TV. (Note: 1.TV is never completely powered off unless physically unplugged. 2. Press to turn on TV after the power on status, LED had changed to the Blue color and stopped flashing.) SOURCE Press repeatedly to choose the... -
Page 13: Viewing Models Illustrations
VIEWING MODELS ILLUSTRATIONS Normal Mode The original content would be at the center of the screen. 16:9 Content 4:3 Content Wide Mode The original content in this mode has to fill the entire screen of the display. 16:9 Content 4:3 Content ZOOM Mode For those wide format images which are originally programmed into 4:3 frames with black bars around, this mode would stretch the image in both width and height for full display with... -
Page 14: Connecting Equipment
CONNECTING EQUIPMENT Coaxial (RF) Using Your Antenna or Digital Cable for 1. Turn off the HDTV. 2. Connect the coaxial (RF) connector from your antenna or digital cable (out-of- the-wall, not from the Cable Box) to the ANTENNA/CABLE DIGITAL/ANALOG connector. 3. - Page 15 Connecting your HDTV Set-Top Box (Best) 1. Turn off the HDTV and HDTV Set-Top Box. 2. Connect a HDMI cable to the HDMI output of your HDTV Set-Top Box and the other end to the HDMI Input at the rear of the HDTV.
- Page 16 Using Component Video Connecting your HDTV Set-Top Box (Better): 1. Turn off the HDTV and HDTV Set-Top Box. 2. Connect the Pr (red color) connector on your HDTV Set-Top Box to the corresponding Pr (red color) connector in the Component group. 3.
- Page 17 Using Coax (RF) 1. Turn off the HDTV and Set-Top Box. 2. Using a Coax (RF) cable, connect one end to the TV OUT (RF) on your Set Top Box and the other end to the TV input at the rear of the HDTV.
- Page 18 Using Component Video Connecting your DVD Player (Better) 1. Turn off the HDTV and DVD player. 2. Connect the Pr (red color) connector on your DVD player to the corresponding Pr (red color) connector in the Component at the rear of the HDTV. 3.
- Page 19 Using Composite (AV) Video Connecting your DVD Player (Good) 1. Turn off the HDTV and DVD player. 2. Connect the Video (yellow color) connector on your DVD player to the Video (yellow color) connector in the AV group. 3. Connect the R (red color) and L (white color) audio connectors on your DVD player to the corresponding R (red color) and L (white color) audio input connectors...
- Page 20 Connecting to a PC 1. Turn off the HDTV and PC. 2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your PC and the other end to the VGA input at the rear of the HDTV. 3.
-
Page 21: To Use The Menus
TO USE THE MENUS 1. Press the MENU/EXIT button to display or close the main menu 2. Use the Navigation Ring to move around to select, adjust or confirm an item in the OSD (On Screen Display) menu. Press the MENU/EXIT button to enter the main OSD. -
Page 22: Audio Menu
AUDIO MENU The Audio menu in TV mode shows as below. It provides audio adjustment for user to modify the audio setting. Audio language setting is only available with ATSC TV source, the option is disable under other source modes. Video Sound Mode Bass... - Page 23 effect degrees, such as: Low, Mid, High and Off. The default setting is Mid. [Adaptive Contrast] – Choose On or off to adjust the gamma after analyzing the input signal automatically. [DCR] – Dynamic Contrast Ratio (DCR) auto adjusts the backlight of the screen. [Preset] –...
-
Page 24: Vga Menu
10.Digital Captions Setup: Provide numerous options for setting the digital closed caption style in the sub-menu. [Style] – Set to Automatic or Custom mode. If Custom mode is selected, user can modify the detail styles described below. The setting result will be shown immediately on the bottom of the sub-menu OSD. -
Page 25: Tips
TIPS Care of the screen Do not rub or strike the screen with anything hard as this may scratch, mar, or damage the screen permanently. Unplug the power cord before cleaning the screen. Dust the TV by wiping the screen and the cabinet with a soft, clean cloth. -
Page 26: Product Specification
PRODUCT SPECIFICATION NOTE * This model complies with the specifications listed below. * Designs and specifications are subject to change without notice. * This model may not be compatible with features and/or specifications that may be added in the future. 32”... -
Page 27: Before Calling Service
BEFORE CALLING SERVICE Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms “Ghost ” or double image No power No picture Good picture but no sound... -
Page 28: Glossary
GLOSSARY HDTV HDTV displays are technically defined as being capable of displaying a minimum of 720p or 1080i active scan lines. HDMI Inputs High-Definition Multimedia Interface Audio / Video Inputs Located on the rear of the receiver, these connectors (RCA phono type plug) are used for the input of audio and video signals.