Table of Contents
Advertisement
CAUTION
FOR CONTINUED PROTECTION AGAINST
REPLACE =
GMLY WITH FUSE OF THE SPCCINED VOLTAGE Ane
2
DISCONNECT POWER SUPPLY BEFORE REPLACING FUSE.
Wie VOLTAGE RANGE (AC Fuse 20
Fig. 6
REAR PANEL
@
ZAXIS INPUT
Z AXIS INPUT
External intensity modulation input; TTL compatible.
Positive
voltage
increases
brightness,
negative
voltage decreases brightness.
CH1 OUTPUT (Except CS-1021)
CH1 vertical output signal connector.
AC coupled output connector.
This connector is used to measure the frequency by
connecting the frequency counter.
For stable opera-
tion, do not connect CH1 OUTPUT to channel 2 input
as cascaded operation.
External intensity modulation input; TTL compatible.
Positive
voltage
increases
brightness,
negative
voltage decreases brightness.
VERT OUTPUT
Vertical output signal connector.
AC coupled output connector.
This connector is used to measure the frequency by
connecting the frequency counter.
14
Fuse Holder
Contains the line fuse. Verify that the proper fuse is
installed when replacing the line fuse.
100 V,120 V
220 V, 240 V
Fuse Holder
Contains the line fuse. Verify that proper fuse is in-
stalled when replacing the line fuse.
100V, 120V
220V, 240V
Advertisement
Table of Contents
