Control Operations Following Maintenance - Kohler 3APU-HC Manual

Maintenance - 5
Fig. 35
5.11

Control Operations Following Maintenance

1 If leaks or dripping are found, operate as follows:
a) If the leaks are due to incorrect assembly of components, correctly reassemble the pipes and/or components that
have been modified;
b) If the leaks are due to breakage or system irregularities, contact the authorized Kohler Distributor/Dealer.
2 After completing the maintenance operations, replace the protection case (B) and fasten it with the screw (A) by means
of the supplied spanner (Fig. 36).
Fig. 36
TP-6576 12/07b
THIS MANUAL IS PROPRIETY OF - ALL FORMS OF REPRODUCTION, PARTIAL OR OTHERWISE, IS STRICTLY PROHIBITED
32