Pioneer SX-J720 Operating Instructions Manual page 53

TIMER PLAYBACK
{To activate the timer]
1. Press the Timer On/Off button and select "WAKE
UP?".
Each time the button is pressed, the mode changes in the
following order:
+ REC - WAKE-UP
Time Display ——
2. Press the Set button.
3. Use the up 4 or down V buttons to select either
"WAKE-UP 1" or "WAKE-UP 2".
Each time the button is pressed, the mode changes in the
following order:
WAKE-UP 1 — WAKE-UP 2
OFF oes |
4. Press the Set button. if the power is ON, switch it
OFF.
106
<ARE1293>
En
[To change the timer setting]
Input the new setting, beginning with the first step.
[lf you make a mistake while setting the timer]
Complete the entire process first, then input correctly from the
beginning.
[Turning the Timer On/Off] -
After inputting the timer setting, check the tuner display to con-
firm which timer is set to ON. The timer whose indicator is
lighted (WAKE-UP 1 or 2) will be activated. If one of the timer
indicators "WAKE-UP 1 or 2" is not lighted, the timer playback
will not be performed. Since the setting information is stored in
memory, however, the function can be activated merely by
turning the proper indicatar on once again.
[To check the timer settings]
Select 1 or 2 with the Time Mode button. After about five sec-
onds, settings are displayed.