TO SELECT A SPECIFIC PLAYBACK SCENE
1
erect
EFFECT
'SeLEEFOR
SELECTOR
96
<ARE1293>
En
Adjusting the Surround Level
To achieve proper surround
playback, be sure to perform
the following adjustments:
. Use the EFFECT SELECTOR button to select DOLBY
PRO LOGIC SURROUND or DOLBY 3CH LOGIC.
use the remote control unit's CENTER MODE button
_ to select either Normal or Phantom.
. Adjust the volume as desired.
. Press the remote control unit's TEST TONE button
to produce a test tone.
fier's BALANCE control to adjust the right-left speak-
er balance so that the sound level is equal.
to turn off the test tone.
Note regarding the test tone:
When using the DOLBY 3CH LOGIC sound field, no sound
will be produced from the surround speakers,
When the center mode is set to Phantom, no sound will be
produced from the center speaker.