Pioneer SX-J720 Operating Instructions Manual page 23

Stereo tuner amplifier / sound field processor / sound image controller / stereo double cassette tape deck / auto return stereo turntable / speaker system*
Table of Contents

Advertisement

REAR PANEL FACILITIES
®
46
Input/Output jacks
[SX-J320]
PHONO IN: Connect the output cord of the turntable to
these jacks.
AUXIN:
Enables connection to the output jacks of audio
components such as a second CD player.
VIDEO:
IN:
Connect to the audio output jacks of VCR.
OUT:
Connect to the audio input jacks of VCR.
DAT/LD:
IN:
Connect to an LD player's audio output jacks.
With a digital audio tape deck, connect to the
analog audio output jacks.
OUT:
Connect to the analog audio input jacks of the
digital audio tape deck.
[SX-J720/SX-J420]
VIDEO IN:
On the SX-J720, connect to the video output
jack of the CLD-J720 CD CDV LD player.
PHONO IN: Connect the output cord of the turntable to
~
these jacks.
AUXIN:
Enables connection to the video and audio out-
put jacks of video components such as an LD
player.
VIDEO:
IN:
Connect to VCR video and audio output jacks.
OUT:
Connect to VCR video and audio input jacks.
DAT:
IN:
Connect to the analog audio output jacks of the
digital audio tape deck.
OUT:
Connect to the analog audio input jacks of the
digital audio tape deck.
VHF ADAPTER jacks:
Connect to the VIDEO input jacks of your televi-
sion or video deck. if your television has anten-
na input terminals only, the RF modulator JA-
RF3L (sold separately) can be used to connect
here.
<ARE 1293>
En
@® TURNTABLE (DC 12 V OUTPUT) jack
This jack supplies power to turntable PL-J210.
@® CENTER SPEAKER terminal (SX-J720, SX-J420 only)
Connect to the center speaker.
NOTE:
Connect a speaker system
having a nominal impedance
ranging from 8 Q to 16 @ or more..
© SURROUND SPEAKERS jacks
Connect to the Surround speaker system.
NOTE:
Connect a speaker system having a nominal impedance of
16 Q or more.
© TWO VOLTAGE SELECTORS
See page 1.
@ SOUND FIELD PROCESSOR jack (SX-J720, SX-J420
only)
Connect the sound field processor (SP-J720K/SP-J420)
cable here.
SOUND IMAGE CONTROLLER jack (SX-J320 only)
Connect the sound image controller (GR-J320) cable here.
® Ground terminal (GND)
Connect the ground lead of the turntable here (except for
PL-J210).
(9) CHANNEL STEP FM/AM switch
See page 2.

Advertisement

Table of Contents
loading

Table of Contents