Table of Contents
Advertisement
UX-A3 B/E/G/GI/EN
POWER
SUPPLY
A. Connection of AC power cord
@ Connect the AC power cord after all other connections
have been made.
Deck/amp unit
Power cord
B. Operation on car battery (DC 12 V)
2) To car's cigarette lighter socket (12 V)
@ oc
2 12V
oad
DC IN
Exclusive car adapter (market available)
e First connect the car adapter to the DC IN 12 V jack, not
the cigarette lighter socket, because shorting of a plug
i
on the car may cause the fuse to blow out. In addition,
|
be careful not to make a short-circuit between the plugs.
@ When
using
a car
battery,
be sure
to use
the
specified car adapter (marked
©-¢-©@
available
from
an
audio
store)
to
prevent
mishaps
or
damage resulting from different polarity design.
Notes:
e@ When there is a power failure or the AC power cord is
disconnected, the timer/clock setting is erased from
memory. Reset the clock when the power supply is
restored.
@ Do not block the ventilation holes of the deck/amp unit
so that heat can escape. Do not install the unit in a
badly ventilated place.
(No. 1850)
27
Advertisement
Table of Contents
