Table of Contents
Advertisement
Available languages
Available languages
Switch
(Figure 4)
To turn the Cordless Screwdriver "ON" in a forward (driving) position, slide the switch
to the right and align it with the arrow pointing forward. Depress the switch and the
tool will run. Release the switch and the tool will stop. To operate in reverse (remov¬
ing) slide the switch to the left and align it with the arrow pointing backward. Depress
the switch and the tool will run. Release the switch and the tool will stop. To lock
the tool "OFF", slide the switch from either side to the centre (no arrow) position.
Advertisement
Table of Contents
