Table of Contents
Advertisement
1.5.2 Disassembly/assembly of E. VF assembly
(for Color VF)
Note: Place the E. VF assembly with the VF case (upper)
assembly down through the disassembly/assembly
work.
1. Remove the two screws (1, 2) and the eyepiece assem-
bly while disengaging the hook (L!a).
2. Remove the two screws (3, 4). And spread one side of
the top case sub-assembly to disengage the hooks
(L!b, L!c) that are located at both sides of the top case
sub-assembly, then remove the top case sub-assembly.
!
Note
c: When removing the top case sub-assembly, peel
off or unplug the FPC that is bonded to the sub-
assembly.
TOP CASE SUB ASSY
(L
11
b)
FPC
NOTE
11
c
HINGE ASSY
BOTTOM CASE
(S
(L
11
a)
LCD ASSY
(L
11
c)
3
11
a)
4
(S
11
a)
!
d: When reassembling the top case sub-assembly,
Note
be careful not to catch the FPC between any of
the parts.
3. Remove the screw (5) and then remove the LCD assem-
bly.
1
(S
11
a)
5
2
(S
11
b)
(S
11
NOTE
11
d
TOP CASE
SUB ASSY
Fig. 1-5-2
EYE PIECE ASSY
a)
HINGE ASSY
1-11
Advertisement
Table of Contents
