Yamaha YZ 2020 Series Owner's Service Manual page 234

Install while holding down the brush using a
thin screw driver.
ECA24650
NOTICE
Be careful not to damage the brush during
installation.
1
3. Install:
• Gasket "1"
New
• Starter motor yoke "2"
TIP
• Install the starter motor yoke with its groove "a"
facing starter motor rear cover.
• Align the match mark "b" on the starter motor
yoke with the match mark "c" on the starter mo-
tor rear cover.
c a 2
1
4. Install:
• Circlip "1"
• Plain washer "2"
• Gasket "3"
New
• Washer (starter motor front cover) "4"
• Starter motor front cover "5"
TIP
• For installation, align the projections on the
washer with the slots in the front cover.
• Align the match mark "a" on the starter motor
yoke with the match mark "b" on the starter mo-
tor front cover.
b
5-47
ELECTRIC STARTER
a
1 2
5. Install:
• Bolt "1"
• O-ring "2"
New
TIP
Apply the lithium-soap-based grease on the O-
ring.
6. Install:
• Starter motor
• Starter motor bolt
Starter motor bolt
10 N·m (1.0 kgf·m, 7.4 lb·ft)
4 b 5
3
1
2
1