Yamaha YZ 2020 Series Owner's Service Manual page 230

1
2. Install:
• Absorber "1"
TIP
Install the absorber "1" so that the portion with
the mark "5XC" "a" faces to the side plate side.
1
3. Install:
• Side plate "1"
TIP
Install the side plate "1" so that the portion with
the mark "B7B" "a" faces to the starter clutch
side.
1
4. Install:
• Starter clutch
Starter clutch screw
12 N·m (1.2 kgf·m, 8.9 lb·ft)
LOCTITE®
TIP
• Install the starter clutch so that the side of the
starter clutch assembly with the arrow mark is
toward the primary driven gear.
• While holding the side of the clutch housing "1"
with the sheave holder "2" as shown, tighten
a
the starter clutch screws "3".
3
5XC
a
a
5-43
STARTER CLUTCH
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
3
3
1
2