Advertisement
Quick Links
Advertisement
Related Manuals for Proteco BALANCE
Summary of Contents for Proteco BALANCE
- Page 1 Installation manual BALANCE AUTOMATION FOR COUNTERWEIGHT GARAGE DOORS...
- Page 2 Use only original spare parts. Any alteration to the system is prohibited. Proteco Srl will not respond in case of using additional and/or fake spares. Before commissioning the system, deliver the last pages of this manual to the user (section 5, END USER’S TIPS ).
- Page 3 CONTENT QUANTITY DESCRIPTION Complete gear motor with housing Fittings bag Capacitor OPTIONAL Control unit with integrated receiver External release system TECHNICAL FEATURES 230V DIMENSIONS: Door max. width 10 mq Power supply 230V ac Rated power 250W 1400 Capacitor 12,5 µF Absorption 1,3 A Mechanical release for...
- Page 4 INSTALLATION TIPS Fit and secure very well the fixing plate of the telescopic arm to the door fame. Make sure the telescopic arm moves freely. If the gap between the door and the frame is less than 10 mm use curved arms. If the gap is more than 10 mm use straight arms.
- Page 5 Fix strong the support to the door frame keeping a distance between 110 and 150 mm, from the pin of the existing small arm downward. Pic. 2 CURVED TELESCOPIC ARMS STRAIGHT TELESCOPIC ARMS SUPPORT SUPPORT Fit the motor M to the arm, the transmission shaft must be perfectly in line with the transmission bar and the supports.
- Page 6 Pic. 4 INSTALLATION OF DOUBLE MOTOR - LATERAL FIXING ARMS - LATERAL FIXING Fit L1 and L2 arms to the door as shows picture 4. Fix M1 and M2 motors to the arms in line with the arm bushes, kepping a distance between 110 and 150 mm from the pin of the existing small arm downward (Pic.
- Page 7 INSTALLATING THE EXTERNAL RELEASE SYSTEM (Optional) The external release system (OPTIONAL) allows to unlock the garage opener from outside in case of power cut. Pic. 12 • Drill a hole on the door of Ø19 mm in line with the release pin of the motor.
- Page 8 Before proceeding, it is always advisable to check the specific In no case and in no way will Proteco Srl be liable to the end regulations in force. user for damages, including any loss of profits, savings or other accidental or indirect damages, resulting from the use or inability to use PROTECO products.