Advertisement
INSTALLATING THE EXTERNAL RELEASE SYSTEM
(Optional)
The external release system (OPTIONAL) allows to unlock the
garage opener from outside in case of power cut.
•
Drill a hole on the door of Ø19 mm in line with the release pin of
the motor.
•
Insert plate A into the hole, then drill two holes to insert fixing
screws C.
•
Secure plate A from the inner side of the door using bolts E and
washers D.
•
Plug the lock barrel B into the support A, the inox cable goes first.
•
Fix the cable tail inside the door, the lock barrell has to remain
pending when releasing.
Screw
C
A
Plate
•
Plug the key in the lock and rotate.
•
Remove the lock from plate A.
B
•
Plug key F into plate A and rotate until releasing.
D Washer
Hole Ø19 mm
Door
A
Plate
A
Plate
Pic. 12
E Bolt
TESTING THE DOOR OPENER
To complete the installation procedure, refer to the manual of the
control unit supplied.
Once installation has been completed, power up the automation
and carry out a carefull functional check of the gearmotor and all
accessories, making sure in particular that the connected safety
devices and manual release systems work correctly.
Fit and secure the cover.
Give this instruction manual to the end user explaining the correct
operation and use of the automation.
WARNINGS
Keep children aged less than 8 away.
Children aged 8 or older, people with reduced physical
or mental capabilities, or lack of experience, can only
use the automation under supervision, or if they have
received instructions on the safe use of the system and
have understood the related dangers.
This product was designed and built exclusively for the
indicated intended use.
Any different use could compromise the integrity and
safety of the product and should be avoided.
Do not access, for any reason, the internal parts of the
automation: they are dangerous and there are no
components that can be repaired or replaced by
unqualified personnel.
Start remote controls or other command devices only
when the automation is visible and free of dangerous
situations.
Do not allow children to play close the automation area.
6
Advertisement
