Download Print this page

Sharp Z-50 Operation Manual page 8

Electrostatic copying machine
Hide thumbs Also See for Z-50:

Advertisement

@ Open the document cover.
@ Place the original in the upper right cor-
ner, and close the document cover.
© Select the number of copies desired.
@
lf amistake is made, press the clear key to
clear the entry or hold the copy quantity key
down. The maximum number of copies is 19.
@
''0" will make a single copy.
COPY QUANTITY
CLEAR
@ Compensate for light or dark originals.
® Normally set to AUTO EXPOSURE.
® Set to DARK to darken the copy.
®@ Set to LIGHT to lighten the copy.
© Press the print key when the green light
indicates that the copier is ready.
@ Press the clear key to stop copying.
The 2-50 enters the power save mode and the
READY indicator starts blinking approximately 90
sec, after the last copy is made. Copying is pos-
sible in the power save mode, but the first copy
may take a few seconds longer than usual.

Advertisement

loading