Advertisement
(MANUAL BY-PASS FEED)
The manual feed by-pass is used to feed OHP films, labels, tracing paper, and other
special purpose papers. For best results, use only Sharp recommended supplies.
The maximum copy size is A4 (8-1/2" x 11"). The minimum copy size is 55 x 91
mm (2" x 3-1/2").
1. Set the original face down on the docu-
ment
glass, and
close the document
cover.
2. Set the by-pass guide to the width of the
copy paper.
3. Insert a single sheet of copy paper into
the manual feed by-pass.
@ The paper will be fed automatically and the
copy made.
If copies are difficult to remove from the exit tray
when copying on a business card or other small
card, pull out the card tray to remove the copy.
Card tray
Advertisement
