Sharp Z-50 Operation Manual page 19

e Is the copy paper properly loaded
_ in the cassette and the guides ad- —
_ ~ justed to the paper size? . . s
"@ Is the copy paper damp? Use only -
dry, flat copy paper. :
'@Were "special papers" fed from the -
cassette? 2g
_ Images rub off the copy easily.
-@\s'the copy paper too heavy?
~ @ Is there a misfeed in the fusing area?
« @ls the copy paper: damp? :
@ Please contact your authorized Sharp Service
Kt Centre immediately if the problem persists after
checking the above.
The copier will not function if either of these codes
appears on the copy quantity display.
In either case, service by your authorized Sharp
Service Centre is required.