Advertisement
Buttons
Upper haif
release button
. Remove the copier from the bag, remove
the tape holding the document
cover
and exit tray.
. Press the buttons on both sides of the
copier and open the front cover.
If the drum cartridge is factory installed, skip
steps 3 through 6 and proceed to step 7.
. Slide the document cover left and press
the upper half release button to open the
copier.
. Remove
the
cover
from
the
drum
cartridge.
5. Slide the drum cartridge into place.
. Close the upper
half, making
sure
it
latches.
- Remove the developer cartridge from
the bag and shake it horizontally four or
five times.
- Remove the cover from the developer
cartridge.
Save the developer cartridge cover. It should
be used to seal the developer cartridge if the
copier must be shipped for servicing or in
case you move. (See page 18.)
Advertisement
