Machine Description; Short Description; Purpose Of Use; Layout - Norton clipper CFP13 W B Operating Instructions Manual

VERS. 2023.03.15

2 MACHINE DESCRIPTION

Any modification, which could lead to a change in the original characteristics of the machine, may be
done only by Saint-Gobain Abrasives who shall confirm that the machine is still in conformity with the
safety regulations.

Short description

2.1
The compactor CPF13 W B is suitable for repairing asphalted surfaces, for small compacting jobs
and for preparing green areas
As with all other NORTON products, the operator will immediately appreciate the attention given to
detail and quality of materials used in construction. The machine and its component parts are
assembled to high standards assuring long life and minimum maintenance.

Purpose of use

2.2
The vibration required for tamping is produced by the exciter which is on the compacting plate.
The engine starts the exciter and the torque is transmitted by the centrifugal clutch and by the belt.
In order to allow the idling of the drive engine, the centrifugal clutch, at low engine speeds, interrupts
the flow of power to exciter.
The engine supporting and the compacting plates are connected by 4 shockmount, which are
mounted to avoid that vibrations reach the operator.
Only use the machine for the purpose for which it is intended.

Layout

2.3
CFP13 W B _MAN_ EN
9