VERS. 2023.03.15
4 OPERATING THE MACHINE
Site of work
4.1
•
Remove from the site anything, which might hinder the working procedure!
•
Make sure the site is sufficiently well lit!
•
Make sure you have a continual adequate view of the working area so you can intervene in the
working process at any time!
•
Keep other staff out of the area, so you can work securely.
Preparing the site
4.2
Ad equation to compaction, it will be necessary to identify the characteristics of soils and material, to
study their ability
5 TRANSPORT AND STORING
Transport procedure
5.1
Conform yourself to work regulations, in order to transport the machine safely. To help you transport
the machine, you can remove the transport tube from under the handle and located in the front hole
of the machine.
Long period of inactivity
5.2
If the machine is not going to be used for a long period, completely clean the machine and
disassemble the tools. The storage site must be clean, dry and at a constant temperature.
6 MAINTENANCE AND SERVICE
Maintenance of the machine
6.1
Always perform the maintenance of the machine with the battery disconnected.
To ensure a long-term quality from the use of the Clipper compactors CPF13W W B, please follow
the maintenance plan below:
- Check the eccentric cover (daily)
- Check the belt tension manually (after 20 hours)
- Check the oil level at the eccentric (every 150h) and change the oil (every 200h)
Cleaning the machine
The life of your machine depends on its maintenance. Clean it at the end of each day.
CFP13 W B _MAN_ EN
15