Machine Description; Short Description; Purpose Of Use; Layout - Norton Clipper CT 901 HP Operating Instructions Manual

VERS. 2017.11.21 CT901HP_MAN_EN

2 MACHINE DESCRIPTION

Any modification, which could lead to a change in the original characteristics of the machine, may
be done only by Saint-Gobain Abrasives who shall confirm that the machine is still in conformity
with the safety regulations.

2.1 Short description

The Mechanical Trowel CT901HP is designed for durability and high performance for onsite
finishing operations on wet concrete floors.
As with all other NORTON products, the operator will immediately appreciate the attention given to
detail and quality of materials used in construction. The machine and its component parts are
assembled to high standards assuring long life and minimum maintenance.

2.2 Purpose of use

The Clipper Mechanical Trowel CT901HP is designed for onsite finishing operations on wet
concrete floors. It is not designed for any other purpose.

2.3 Layout

Handle (1)
Jig welded steel construction including 2 rubber grips. A dead-man handle (7) allows the operator to
work safely and to stop the machine at any moment. The angle of the machine arm can be adjusted
to operate the machine comfortably. A tube (8) is located under the handle, this will help you
transport the machine per hand.
8